Plywood is glued with phenolic resin adhesive that meets the following standards:
- BS 1203 / H4 (WBP)
- DIN 68705 part 3 / type BFU 100
- EN 314 / 3rd class
Formaldehyde emission level shall not exceed 0.2 mg HCHO/m2h, which meets the standard E1
Thickness
Thickness (mm): 4, 6, 6.5, 8, 9, 12, 15, 18, 21, 24, 27, 30, 35, 40, 45, 50
Sizes
Sizes (mm): 1220x2440, 2440x1220, 1250x2500, 2500x1250, 1500x2500, 1500x3000, 1525x3050, 2150x3850
Grades
B - The highest quality plywood, sanded, with no discoloration and external defects, for painting
BB - High-quality plywood, sanded, with only minor trim and healthy knots, varnishing and painting
CP - The standard quality plywood, sanded, larger defects, corrected insertions, more defects than in the class BB
C - The lowest grade plywood, uncut, holes and knots
Meets standards requirements GOST 3916.1-96.
Determined above quality grades affects only exterior veneer and do not affect the strength parameters of the plywood.
Application
- furniture industry
- boatbuilding
- carpentry
- automotive industry
- construction
- packaging industry
- playgrounds
- sport equipment
-
Indoor and outdoor use.
|